IEI Technology NANO-ULT5, User Manual

Page: 117 / 147

NANO-ULT5 SBC
Page 103

Backlight Control Mode [CCFL]
Use the Backlight Control Mode option to specify the backlight control mode.
Configuration options are listed below.

LED

CCFL D
EFAULT
5.4.2 PCH-IO Configuration
Use the PCH-IO Configuration menu ( BIOS Menu 23 ) to configure the PCH-IO chipset.
Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc.
Chipset
PCH-IO Configuration
Auto Power Button Status [Disable (ATX)]
Restore AC Power Loss [Last State]
Power Saving Function(ERP) [Disabled]
USB Power SW [+5V DUAL]
> PCI Express Configuration
> SATA And RST Configuration
HD Audio [Enabled]
Select AC power state when
power is re-applied after
a power failure.
---------------------

: Select Screen
↑ ↓ : Select Item
Enter Select
+ - Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
BIOS Menu 23: PCH-IO Configuration

Restore AC Power Loss [Last State]
Use the Restore AC Power BIOS option to specify what state the system returns to if
there is a sudden loss of power to the system.

Power Off
The system remains turned off

Power On
The system turns on

Last State D
EFAULT
The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.