IEI Technology NANO-ULT5, User Manual

Page: 109 / 147

NANO-ULT5 SBC
Page 95

Stop Bits [1]
Use the Stop Bits option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.

1 D
EFAULT
Sets the number of stop bits at 1.

2
Sets the number of stop bits at 2.
5.3.9 USB Configuration
Use the USB Configuration menu ( BIOS Menu 15 ) to read USB configuration
information and configure the USB settings.
Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc.
Advanced
USB Configuration
USB Controllers:
1 XHCI
USB Devices:
1 Keyboard
Legacy USB Support [Enabled]
Enables Legacy USB
support. AUTO option
disables legacy support
if no USB devices are
connected. DISABLE
option will keep USB
devices available only
for EFI applications.
---------------------

: Select Screen
↑ ↓ : Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
BIOS Menu 15: USB Configuration

USB Devices
The USB Devices Enabled field lists the USB devices that are enabled on the system