IEI Technology NANO-LX2 User Manual Download Page 82

Page: 82 / 183

NANO-LX2 EPIC NANO Motherboard

Page 66

5.4 Chassis Installation

5.4.1 Airflow

WARNING:

Airflow is critical to the cooling of the CPU and other onboard

components. The chassis in which the NANO-LX2 must have air vents

to allow cool air to move into the system and hot air to move out.

The NANO-LX2 must be installed in a chassis with ventilation holes on the sides allowing

airflow to travel through the heat sink surface. In a system with an individual power supply

unit, the cooling fan of a power supply can also help generate airflow through the board

surface.

5.4.2 NANO-LX2 Installation

To install the NANO-LX2 motherboard into the chassis please refer to the reference

material that came with the chassis.

5.5 Internal Peripheral Device Connections

The cables listed in

Table 5-4

are shipped with the NANO-LX2.

Quantity

Type

1 Audio

cables

1 IDE

cable

USB dual port cable

Table 5-4: IEI Provided Cables

5.5.1 ATA Flat Cable Connection

The ATA 33 flat cable connects the NANO-LX2 to one or two IDE devices. To connect an

IDE HDD to the NANO-LX2 please follow the instructions below.

Summary of Contents for NANO-LX2
























































































































































































Search results

Summary of Contents for NANO-LX2

Reviews:

Related manuals for NANO-LX2

Brands by name

Popular brands

IEI Technology NANO-LX2, User Manual

Search results

Summary of Contents for NANO-LX2

Reviews:

Related manuals for NANO-LX2

Brands by name

Popular brands