IEI Technology NANO-LX2 User Manual Download Page 122

Page: 122 / 183

NANO-LX2 EPIC NANO Motherboard

Page 106

7.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product and

is subject to change without prior notice. Visit the IEI website or contact

technical support for the latest updates.

The NANO-LX2 CPU module has six software drivers:

LAN driver

Entertainment Encryption/Decryption driver

Audio driver

VGA driver

All four drivers can be found on the CD that came with the embedded module. To install

the drivers please follow the instructions in the sections below.

7.2 Open the Device Manager in Windows

To install the drivers, please access the

INDOWS

EVICE

ANAGER

. To do this, follow the

instructions below.

Step 1:

Insert the CD into a CD drive of the system that contains the NANO-LX2.

Step 2:

Open

INDOWS

ONTROL

ANEL

. (See

Figure 7-1

)

Summary of Contents for NANO-LX2
























































































































































































Search results

Summary of Contents for NANO-LX2

Reviews:

Related manuals for NANO-LX2

Brands by name

Popular brands

IEI Technology NANO-LX2, User Manual

Search results

Summary of Contents for NANO-LX2

Reviews:

Related manuals for NANO-LX2

Brands by name

Popular brands