IEI Technology NANO-KBN-i1, User Manual, Page: 115 / 158

NANO-KBN-i1
P a g e 101
NOTE:
Installing unsupported OS versions may cause the recovery tool to fail.
B.2 S e tu p P ro c e d u re fo r Win d o ws
Prior to using the recovery tool to backup or restore, a few setup procedures are required.
S te p 1:
Hardware and BIOS setup (see Section B.2.1 )
S te p 2:
Create partitions (see Section B.2.2 )
S te p 3: Install operating system, drivers and system applications (see Section B.2.3 )
S te p 4:
Build the recovery partition (see Section B.2.4 )
S te p 5: Create factory default image (see Section B.2.5 ) Step 0 :
The detailed descriptions are described in the following sections.
NOTE:
The setup procedures described below are for Microsoft Windows
operating system users. For Linux, most of the setup procedures are
the same except for several steps described in Section B.3 .
B.2.1 Ha rd wa re a n d BIOS S e tu p
S te p 1:
Make sure the system is powered off and unplugged.
S te p 2: Install a hard drive or SSD in the system. An unformatted and unpartitioned disk
is recommended.
S te p 3: Connect an optical disk drive to the system and insert the recovery CD.
S te p 4:
Turn on the system.