NANO-GM45A2 EPIC SBC
Page 54
4.7.3 Audio Kit Installation
The Audio Kit that came with the NANO-GM45A2 connects to the audio connector on the
NANO-GM45A2. The audio kit consists of three audio jacks. Mic-in connects to a
microphone. Line-in provides a stereo line-level input to connect to the output of an
audio device. Line-out, a stereo line-level output, connects to two amplified speakers. To
install the audio kit, please refer to the steps below:
Step 13:
Locate the audio connector
. The location of the 10-pin audio connector is
shown in
Chapter 3
.
Step 14:
Align pin 1
. Align pin 1 on the on-board connector with pin 1 on the audio kit
connector. Pin 1 on the audio kit connector is indicated with a white dot. See
Figure 4-15: Audio Kit Cable Connection
Step 15:
Connect the audio devices
. Connect speakers to the line-out audio jack.
Connect the output of an audio device to the line-in audio jack. Connect a
microphone to the mic-in audio jack.
Step 0:
Summary of Contents for NANO-GM45A2
