IEI Technology NANO-GM45A2-R10, User Manual

Page: 93 / 148

NANO-GM45A2 EPIC SBC
Page 81
5.3.7 Super IO Configuration
Use the Super IO Configuration menu ( BIOS Menu 11 ) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Power Exit
Serial Port1 Address
[3F8]
Serial Port1 IRQ [4]
Serial Port2 Address [2F8]
Serial Port2 IRQ [3]
Serial Port3 Address [3E8]
Serial Port3 IRQ [4]
Serial Port4 Address [2E8]
Serial Port4 IRQ [3]
Allows BIOS to select
Serial Port Base
Addresses
Select Screen
↑ ↓
Select Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 11: Super IO Configuration
Serial Port1 Address [3F8]
Use the Serial Port1 Address option to select the Serial Port 1 base address.
Disabled
No base address is assigned to Serial Port 1
3F8 D
EFAULT
Serial Port 1 I/O port address is 3F8
2F8
Serial Port 1 I/O port address is 2F8
Serial Port1 IRQ [10]
Use the Serial Port1 IRQ option to select the interrupt address for serial port 1.
4 Serial port 1 IRQ address is 4
3 Serial port 1 IRQ address is 3