IEI Technology NANO-GM45A, User Manual, Page: 71 / 128

NANO-GM45A EPIC SBC
Page 59
Step 1: Locate the RJ-45 connectors . The locations of the USB connectors are shown
in Chapter 4 .
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the NANO-GM45A. See
5
Figure 4-19 .
Figure 4-19: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector. Step 0:
4.8.2 USB Connection (Dual Connector)
The external USB Series "A" receptacle connectors provide easier and quicker access to
external USB devices. Follow the steps below to connect USB devices to the
NANO-GM45A.
Step 1: Locate the USB Series "A" receptacle connectors . The location of the USB
Series "A" receptacle connectors are shown in Chapter 3 .
Step 2: Insert a USB Series "A" plug . Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See Figure
4-20. Step 0: