IEI Technology NANO-GM45A, User Manual, Page: 72 / 128

NANO-GM45A EPIC SBC
Page 60
Figure 4-20: USB Connector
4.8.3 VGA Monitor Connection
The NANO-GM45A has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the NANO-GM45A, please follow the instructions below.
Step 1: Locate the female DB-15 connector . The location of the female DB-15
connector is shown in Chapter 3 .
Step 2: Align the VGA connector . Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
NANO-GM45A. See
5
Figure 4-21 .