manualshive.com logo in svg

IEI Technology NANO-GM45A, User Manual, Page: 68 / 128

Share
Download
IEI Technology NANO-GM45A User Manual Download Page 68

 

 

NANO-GM45A EPIC SBC

Page 56

 

4.7.3 Audio Kit Installation 

The Audio Kit that came with the NANO-GM45A connects to the audio connector on the 

NANO-GM45A. The audio kit consists of three audio jacks. Mic-in connects to a 

microphone.  Line-in provides a stereo line-level input to connect to the output of an 

audio device.    Line-out, a stereo line-level output, connects to two amplified speakers. To 

install the audio kit, please refer to the steps below: 

Step 1: 

Locate the audio connector

. The location of the 10-pin audio connector is 

shown in 

Chapter 3

. 

Step 2: 

Align pin 1

. Align pin 1 on the on-board connector with pin 1 on the audio kit 

connector. Pin 1 on the audio kit connector is indicated with a white dot. See 

Figure 4-16

. 

Figure 4-16: Audio Kit Cable Connection 

 

Step 3: 

Connect the audio devices

. Connect speakers to the line-out audio jack.   

Connect the output of an audio device to the line-in audio jack. Connect a 

microphone to the mic-in audio jack.

Step 0:

 

Summary of Contents for NANO-GM45A

































































































































Reviews:

No comments