NANO-BT-i1 EPIC SBC
Page 67
Figure 4-13: Single RS-232 Cable Installation
Step 3:
Secure the bracket
. The single RS-232 connector has one D-sub 9 male
connector secured to a bracket. To secure the bracket to the chassis please
refer to the reference material that came with the chassis.
Step 0:
4.5 External Peripheral Interface Connection
This section describes connecting devices to the external connectors on the NANO-BT-i1.
4.5.1 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1:
Locate the RJ-45 connectors
. The locations of the LAN connectors are shown
in
Chapter 3
.
Step 2:
Align the connectors.
Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the NANO-BT-i1. See
Summary of Contents for NANO-BT-i1 Series
