IEI Technology NANO-9453 User Manual Download Page 162

Page: 162 / 242

NANO-9453 EPIC Motherboard

Page 144

HiSpeed D

EFAULT

The controller is capable of operating at 480Mb/s

BIOS EHCI Handoff [Enabled]

Use the

BIOS EHCI Handoff

option for systems running OSes that do not have EHCI

hand-off support. The EHCI ownership change is managed by the EHCI driver.

Disabled

Systems with OSes that do not support EHCI can

use the EHCI handoff functionality.

Enabled D

EFAULT

Systems with OSes that do not support EHCI cannot

use the EHCI handoff functionality.

6.3.9.1 USB Mass Storage Device Configuration

Use the USB Mass Storage Device Configuration menu (BIOS Menu 14) to configure USB

mass storage class devices.

BIOS Menu 14: USB Mass Storage Device Configuration

Summary of Contents for NANO-9453



















































































































































































































































Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands

IEI Technology NANO-9453, User Manual

Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands