IEI Technology Mustang-V100-MX8, User Manual

Page: 32 / 64

Mustang-V100-MX8
Page 24
o For Caffe:
sudo ./install_prerequisites_caffe.sh
o For TensorFlow:
sudo ./install_prerequisites_tf.sh
o For MXNet:
sudo ./install_prerequisites_mxnet.sh
o For ONNX:
sudo ./install_prerequisites_onnx.sh
o For Kaldi:
sudo ./install_prerequisites_kaldi.sh
The Model Optimizer is configured for one or more frameworks. You are ready to use two
short demos to see the results of running the Intel Distribution of OpenVINO toolkit and to
verify your installation was successful. The demo scripts are required since they perform
additional configuration steps. Continue to the next section.
4.4 Steps for Intel® Vision Accelerator Design with Intel®
Movidius™ VPUs Mustang-V100-MX8 Driver Installation
1. Install dependencies:
sudo apt install libusb-1.0-0 libboost-program-options1.58.0
libboost-thread1.58.0 libboost-filesystem1.58.0 libssl1.0.0
libudev1 libjson-c2
2. Add the current Linux user to the users group:
sudo usermod -a -G users "$(whoami)"
3. Log out and log in for it to take effect.
4. If your Intel® Vision Accelerator Design with Intel® Movidius™ VPUs card requires
SMBUS connection to PCIe slot (Raw video data card with HW version Fab-B and
before), generate rules for SMBUS controller and enable the i2c_i801 driver (Intel®
SMBUS controller driver):
cd ${HDDL_INSTALL_DIR}
sudo chmod +x ./generate_udev_rules.sh