IEI Technology Mustang-V100-MX8-R10, User Manual

Page: 33 / 64

Mustang-V100-MX8
Page 25
sudo ./generate_udev_rules.sh /etc/udev/rules.d/98-hddlbsl.rules
5. Check if the file /etc/modprobe.d/blacklist.conf contains the line "blacklist i2c_i801"
and comment it out if so:
sudo sed -i "s/\(.*i2c_i801$\)/#\1/g"
/etc/modprobe.d/blacklist.conf
sudo modprobe i2c_i801
6. Before you start installing the drivers, make sure there is no inference application is
running. Use the following command to make sure there is no HDDL service is
running:
kill -9 $(pidof hddldaemon autoboot)
7. Install the drivers:
cd ${HDDL_INSTALL_DIR}/drivers
sudo chmod +x ./setup.sh
sudo ./setup.sh install
sudo cp -av ${HDDL_INSTALL_DIR}/../97-myriad-usbboot.rules
/etc/udev/rules.d/
sudo cp -av ${HDDL_INSTALL_DIR}/etc /
sudo udevadm control --reload-rules
sudo udevadm trigger
sudo ldconfig
Now, the Mustang-V100-MX8 drivers are installed.
4.5 Use the Demo Scripts to Verify Your Installation
Important: This section is required. In addition to confirming that your installation was
successful, the demo scripts perform additional steps, such as setting up your computer to
use the Model Optimizer samples.
To learn more about the demo applications, see README.txt in
/opt/intel/computer_vision_sdk/deployment_tools/demo/.
For detailed description of the pre-trained object detection and object recognition models,
go to /opt/intel/computer_vision_sdk/deployment_tools/intel_models/ and open
index.html.