IEI Technology MODAT-335, User Manual

Page: 31 / 74

MODAT-335A Field Service Terminal
Page 21
Step 3:
Insert the MODAT-335A into the cradle to start charging the battery (
Figure 3-5
).
Step 0:
Figure 3-5: Inserting the MODAT-335A to the Charging Cradle
3.4 Installing the Optional Barcode Trigger Grip
The optional barcode trigger grip allows users to easily hold the MODAT-335A when
scanning barcodes. Please follow the steps below to install the optional item.
Step 1:
Place the MODAT-335A on a flat surface, facing the front panel to it.
Step 2:
Attach the barcode trigger grip to the MODAT-335A, aligning with the four screw
holes (
Figure 3-6
).
Step 3:
Secure the barcode trigger grip to the MODAT-335A with the four supplied
retention screws (
Figure 3-6
).