IEI Technology MODAT-335 User Manual Download

Page: 13 / 74

MODAT-335A Field Service Terminal

Page 3

1.3 Features

The MODAT-335A features the following:

TI Sitara™ AM3715 800 MHz CPU

3.5” sunlight readable TFT LCD touchscreen with stylus input

Android 4.1.2 OS

Bluetooth v4.0 , 802.11a/b/g/n Wi-Fi and UMTS/HSPA+/GSM/GPRS/EDGE

wireless communication technologies

GPS

supported

13.56 MHz RFID supported

1D laser/2D imager scan engine

3-megapixel CMOS camera with LED flashlight

microSD card slot

Mini USB client port

1.4 Applications

The MODAT-335A can be applied in the following areas:

MES

Retail

Logistics

Warehouse

1.5 External Overview

The MODAT-335A combines its features in a stylish and ergonomic enclosure. The

MODAT-335A consists of a screen, rear panel, top panel, bottom panel and two side

panels (left and right). The panels are described in detail in the following sections.

Summary of Contents for MODAT-335











































































Search results

Summary of Contents for MODAT-335

Reviews:

Related manuals for MODAT-335

Brands by name

Popular brands

IEI Technology MODAT-335, User Manual

Search results

Summary of Contents for MODAT-335

Reviews:

Related manuals for MODAT-335

Brands by name

Popular brands