IEI Technology KINO-QM770, User Manual

Page: 73 / 208

KINO-QM770 Mini-ITX SBC
Page 57
Step 5: Align the CPU pins. Carefully align the CPU pins with the holes in the CPU
socket.
Step 6: Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are
properly aligned, the CPU should slide into the CPU socket smoothly.
Step 7: Lock the retention screw. Rotate the retention screw into the locked position.
See Figure 4-2 .
Figure 4-2: Lock the CPU Socket Retention Screw
4.3.2 Socket G2 Cooling Kit Installation
An IEI Socket G2 CPU cooling kit can be purchased separately (See Chapter 2 ). The
cooling kit is comprised of a CPU heat sink and a cooling fan.
WARNING:
Do not wipe off (accidentally or otherwise) the pre-sprayed layer of
thermal paste on the bottom of the heat sink. The thermal paste
between the CPU and the heat sink is important for optimum heat
dissipation.
To install the cooling kit, please follow the steps below.