IEI Technology KINO-QM770 User Manual Download Page 108

Page: 108 / 208

KINO-QM770 Mini-ITX SBC

Page 92

Intel AMT [Enabled]

Use

Intel AMT

option to enable or disable the Intel® AMT function.

Disabled

Intel® AMT is disabled

Enabled D

EFAULT

Intel® AMT is enabled

Un-Configure ME [Disabled]

Use the

Un-Configure ME

option to perform ME unconfigure without password operation.

Disabled D

EFAULT

Not perform ME unconfigure

Enabled

To perform ME unconfigure

5.3.9 USB Configuration

Use the

USB Configuration

menu (

BIOS Menu 11

) to read USB configuration

information and configure the USB settings.

Advanced

USB Configuration

USB Devices:
1 Keyboard, 2 Hubs

Legacy USB Support

[Enabled]

Enables Legacy USB
support. AUTO option
disables legacy support
if no USB devices are
connected. DISABLE
option will keep USB
devices available only
for EFI applications.

---------------------

ÅÆ

: Select Screen

↑

↓

: Select Item

Enter

Select

F1 General

Help

F2 Previous

Values

F3 Optimized
Defaults
F4 Save

ESC Exit

BIOS Menu 11: USB Configuration

Summary of Contents for KINO-QM770

















































































































































































































Search results

Summary of Contents for KINO-QM770

Reviews:

IEI Technology KINO-QM770, User Manual, Page: 108 / 208

Search results

Summary of Contents for KINO-QM770

Reviews: