IEI Technology KINO-QM57A User Manual Download Page 77

Page: 77 / 160

KINO-QM57A Mini-ITX SBC

Page 63

Figure 4-13: iTPM Enable Jumper Location

4.6 Chassis Installation

4.6.1 Airflow

WARNING:

Airflow is critical to the cooling of the CPU and other onboard

components. The chassis in which the KINO-QM57A must have air

vents to allow cool air to move into the system and hot air to move out.

The KINO-QM57A must be installed in a chassis with ventilation holes on the sides

allowing airflow to travel through the heat sink surface. In a system with an individual

power supply unit, the cooling fan of a power supply can also help generate airflow

through the board surface.

4.6.2 Motherboard Installation

To install the KINO-QM57A motherboard into the chassis please refer to the reference

material that came with the chassis.

Summary of Contents for KINO-QM57A

































































































































































Search results

Summary of Contents for KINO-QM57A

Reviews:

Related manuals for KINO-QM57A

Brands by name

Popular brands

IEI Technology KINO-QM57A, User Manual

Search results

Summary of Contents for KINO-QM57A

Reviews:

Related manuals for KINO-QM57A

Brands by name

Popular brands