manualshive.com logo in svg

IEI Technology KINO-KBN-i2, User Manual

Share
Download
IEI Technology KINO-KBN-i2 User Manual Download Page 85

 

 

KINO-KBN-i2 

Page 71

5.3.3 Trusted Computing 

Use the 

Trusted Computing

 menu (

BIOS Menu 5

) to configure settings related to the 

Trusted Computing Group (TCG) Trusted Platform Module (TPM). 

Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. 

 

Advanced 

 

 

 

 

 

 

 

Configuration 
  

Security Device Support 

[Disable]

 

 

Current Status Information 
  NO Security Device Found

 

 
Enables or Disables BIOS 
support for security 
device. O.S. will not 
show Security Device. 
TCG EFI protocol and 
INT1A interface will not 
be available.  
 
 
---------------------- 
 



: Select Screen 

 

: Select Item 

Enter 

Select 

F1 General 

Help 

F2 Previous 

Values 

F3 Optimized 
Defaults 
F4 Save 

 

ESC Exit 

Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc. 

BIOS Menu 5: Trusted Computing

 

 

Security Device Support [Disable] 

Use the 

Security Device Support

 option to configure support for the security device. 

 

Disable D

EFAULT

 

Security device support is disabled. 

 

Enable  

Security device support is enabled. 

Summary of Contents for KINO-KBN-i2

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands