manualshive.com logo in svg

IEI Technology KINO-G45A, User Manual

Share
Download
IEI Technology KINO-G45A User Manual Download Page 89

 

 

KINO-G45A Mini-ITX Motherboard

Page 78 

 

Legacy USB Support [Enabled] 

Use the 

Legacy USB Support

 BIOS option to enable USB mouse and USB keyboard 

support.  

Normally if this option is not enabled, any attached USB mouse or USB keyboard does not 

become available until a USB compatible operating system is fully booted with all USB 

drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard 

can control the system even when there is no USB driver loaded onto the system.   

 

Disabled  

Legacy USB support disabled 

 

Enabled D

EFAULT

 

Legacy USB support enabled 

 

Auto  

Legacy USB support disabled if no USB devices are 

connected 

 

USB2.0 Controller Mode [HiSpeed] 

Use the 

USB2.0 Controller Mode

 option to set the speed of the USB2.0 controller.   

 

FullSpeed  

The controller is capable of operating at 12 Mb/s 

 

HiSpeed D

EFAULT

 

The controller is capable of operating at 480 Mb/s 

5.4 PCI/PnP 

Use the 

PCI/PnP

 menu (

BIOS Menu 12

) to configure advanced PCI and PnP settings. 

 WARNING! 

Setting wrong values for the BIOS selections in the PCIPnP BIOS 

menu may cause the system to malfunction. 

 

Summary of Contents for KINO-G45A

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands