IEI Technology KINO-DQM871 User Manual Download

Page: 148 / 211

KINO-DQM871 Mini-ITX SBC

Page 133

6.6 USB 3.0 Driver Installation

WARNING:

Do not run this driver’s installer (Setup.exe) from a USB storage device

(ie. external USB hard drive or USB thumb drive). For proper

installation, please copy driver files to a local hard drive folder and run

from there.

To install the USB 3.0 driver, please follow the steps below.

Step 1:

Access the driver list. (See

Section 6.2

)

Step 2:

Click “

4-USB 3.0

”.

Step 3:

Locate the setup file and double click on it.

Step 4:

The

Welcome Screen

Figure 6-20

appears.

Step 5:

Click

Next

to continue.

Figure 6-20: USB 3.0 Driver Welcome Screen

Summary of Contents for KINO-DQM871




















































































































































































































Search results

Summary of Contents for KINO-DQM871

Reviews:

Related manuals for KINO-DQM871

Brands by name

Popular brands

IEI Technology KINO-DQM871, User Manual

Search results

Summary of Contents for KINO-DQM871

Reviews:

Related manuals for KINO-DQM871

Brands by name

Popular brands