IEI Technology KINO-DH420, User Manual

Page: 68 / 87

KINO-DH420 Mini-ITX Motherboard
Page 68
Figure 4-5: Cooling Kit Support Bracket
Step 2:
Place the cooling kit onto the socket LGA1200 CPU . Make sure the CPU
cable can be properly routed when the cooling kit is installed.
Step 3:
Mount the cooling kit . Gently place the cooling kit on top of the CPU. Make
sure the four threaded screws on the corners of the cooling kit properly pass
through the holes of the cooling kit bracket.
Step 4:
Tighten the screws . Use a screwdriver to tighten the four screws. In a
diagonal pattern, tighten each screw a few turns then move to the next one,
until they are all secured. Do not overtighten the screws.
Step 5:
Connect the fan cable . Connect the cooling kit fan cable to the CPU fan
connector on the KINO-DH420. Carefully route the cable and avoid heat
generating chips and fan blades.
Step 0: