manualshive.com logo in svg

IEI Technology KINO-CV-KINO-CV-N26001, User Manual, Page: 16 / 164

Share
Download
IEI Technology KINO-CV-KINO-CV-N26001 User Manual Download Page 16

 

 

KINO-CV-D25501/N26001 SBC

Page 2 

1.1 Introduction 

 

Figure 1-1: KINO-CV-D25501/N26001 

The KINO-CV-D25501/N26001 is a Mini-ITX SBC with a Intel® Atom

™

 D2550 or N2600 

CPU. The KINO-CV-D25501/N26001 is designed for fanless operation. The low power 

CPUs don't require active cooling and stay within specified heat range using the included 

heatsink. 

Storage on the board is handled by a SATA 3Gb/s port for connecting a hard drive, optical 

drive or SSD. The PCIe Mini slot allows an mSATA card to be installed. A bootable 

microSD card can be installed into the on-board microSD slot. 

The board has three types of graphics output. A VGA output connects to a traditional VGA 

monitor, one HDMI connector supports HDMI display and two LVDS connectors support 

18-bit/24-bit displays.   

Other slots and connectors include a PCIe Mini cards slot, PCI slot, RS-232, RS-422/485, 

Gigabit Ethernet, USB 3.0 ports, USB 2.0 ports and digital I/O. 

Summary of Contents for KINO-CV-KINO-CV-N26001





































































































































































Reviews:

No comments