IEI Technology KINO-ATOM, User Manual

Page: 86 / 202

KINO-ATOM Motherboard
Page 68
contact the KINO-ATOM vendor reseller/vendor where the KINO-ATOM was purchased or
contact an IEI sales representative.
5.4 SO-DIMM Installation
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the KINO-ATOM. Please make sure the purchased SO-DIMM complies
with the memory specifications of the KINO-ATOM. SO-DIMM
specifications compliant with the KINO-ATOM are listed in Chapter 2.
To install a SO-DIMM into a SO-DIMM socket, please follow the steps below and refer to
Figure 5-1 .
Figure 5-1: SO-DIMM Installation
Step 1: Locate the SO-DIMM socket . Place the KINO-ATOM on an anti-static pad with
the solder side facing up.
Step 2: Align the SO-DIMM with the socket . The SO-DIMM must be oriented in such a
way that the notch in the middle of the SO-DIMM must be aligned with the
plastic bridge in the socket.