IEI Technology KINO-AQ670 User Manual Download Page 85

Page: 85 / 197

KINO-AQ670

P a g e 71



Disable

Disables Serial-ATA controller.



Enhanced

Configures the Serial-ATA controller to be in enhanced

mode. In this mode, IDE channels and SATA channels

are separated. Some legacy OS do not support this

mode.



Compatible

EFAULT

Configures the Serial-ATA controller to be in compatible

mode. In this mode, a SATA channel will replace one of

the IDE channels.



S e ria l-ATA Co n tro lle r 1 [En h a n c e d ]

Use the

Serial-ATA Controller

option to configure the Serial-ATA controller mode when

the SATA mode is set to IDE Mode.



Disable

Disables Serial-ATA controller.



Enhanced

EFAULT

Configures the Serial-ATA controller to be in enhanced

mode. In this mode, IDE channels and SATA channels

are separated. Some legacy OS do not support this

mode.

5.3.5

In te l TXT(LT) Co n fig u ra tio n

Use the

Intel TXT(LT) Configuration

menu (

BIOS Menu 8

) to configure Intel Trusted

Execution Technology support.

Summary of Contents for KINO-AQ670






































































































































































































Search results

Summary of Contents for KINO-AQ670

Reviews:

IEI Technology KINO-AQ670, User Manual, Page: 85 / 197

Search results

Summary of Contents for KINO-AQ670

Reviews: