IEI Technology KINO-ABT-i2 Series User Manual Download Page 125

Page: 125 / 158

KINO-ABT-i2 Mini-ITX SBC

Page 111

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:



Chipset



Graphics



LAN

Installation instructions are given below.

6.2 Software Installation

All the drivers for the KINO-ABT-i2 are on the CD that came with the system. To install the

drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

NOTE:

If the installation program doesn't start automatically:

Click "Start->My Computer->CD Drive->autorun.exe"

Step 2:

The driver main menu appears (

Figure 6-1

Step 3:

Click

NANO-BT-i1

Summary of Contents for KINO-ABT-i2 Series































































































































































Search results

Summary of Contents for KINO-ABT-i2 Series

Reviews:

Related manuals for KINO-ABT-i2 Series

Brands by name

Popular brands

IEI Technology KINO-ABT-i2 Series, User Manual

Search results

Summary of Contents for KINO-ABT-i2 Series

Reviews:

Related manuals for KINO-ABT-i2 Series

Brands by name

Popular brands