IEI Technology KINO-AA750-i2, User Manual

Page: 89 / 193

KINO-AA750-i2 Mini-ITX SBC
Page 74
Step 2: Align the DVI-D connector . Align the male DVI-D connector on the digital
display device cable with the female DVI-D connector on the external peripheral
interface.
Step 3: Insert the DVI-D connector . Once the connectors are properly aligned with the
male connector, insert the male connector from the digital display device into the
female connector on the KINO-AA750-i2. See Figure 4-20 .
Figure 4-20: DVI-D Connector
Step 4: Secure the connector. Secure the DVI-D connector from the digital display
device to the external interface by tightening the two retention screws on either
side of the connector. Step 0: .
4.12.3 HDMI Display Device Connection
The HDMI connector transmits a digital signal to compatible HDMI display devices such
as a TV or computer screen. To connect the HDMI cable to the KINO-AA750-i2, follow the
steps below.
Step 1: Locate the HDMI connector . The location is shown in Chapter 3 .