IEI Technology KINO-9652 User Manual Download Page 224

Page: 224 / 269

KINO-9652 Mini-ITX SBC

Page 202

8.3 Using the Intel

AMT Web Interface

NOTE:

Prior to use the Intel® AMT web interface, please make sure the Intel®

AMT drivers are properly installed in the KINO-9652 and the Intel®

AMT enabled confirmation dialog window displays after boot-up.

To access an Intel® AMT client system from a remote console, follow the steps below.

Step 1:

Obtain the IP address of the client system.

Step 2:

On the remote management console, open a web browser.

Step 3:

If DHCP is enabled in the TCP/IP menu of the Intel® ME BIOS (

Section 8.2

Step 10

), get the client system IP address in the MS DOS. Enter the client

system IP address and the port number in the web browser:

http://

ip_address

:16992 Example: http://192.168.1.7:16992 (

Figure 8-11

)

Or simply enter the defined host name: http://

host_name

:16992

Example: http://AMTsystem:16992

Figure 8-11: Intel® AMT Web Address

Step 4:

If a static IP address is defined for the Intel® AMT client system, enter the

defined client system IP address and the port number in the web browser.

Step 5:

A login window prompts (

Figure 8-12

Summary of Contents for KINO-9652














































































































































































































































































Search results

Summary of Contents for KINO-9652

Reviews:

IEI Technology KINO-9652, User Manual, Page: 224 / 269

Search results

Summary of Contents for KINO-9652

Reviews: