IEI Technology KINO-9652 User Manual Download Page 134

Page: 134 / 269

KINO-9652 Mini-ITX SBC

Page 112

Auto D

EFAULT

BIOS auto detects HDD SMART support.

Disabled

Prevents BIOS from using the HDD SMART feature.

Enabled

Allows BIOS to use the HDD SMART feature

32Bit Data Transfer [Enabled]

Use the

32Bit Data Transfer

BIOS option to enables or disable 32-bit data transfers.

Disabled

Prevents the BIOS from using 32-bit data transfers.

Enabled D

EFAULT

Allows BIOS to use 32-bit data transfers on supported

hard disk drives.

6.3.3 Super IO Configuration

Use the

Super IO Configuration

menu (

BIOS Menu 6

) to set or change the

configurations for the FDD controllers, parallel ports and serial ports.

BIOS Menu 6: Super IO Configuration

Summary of Contents for KINO-9652














































































































































































































































































Search results

Summary of Contents for KINO-9652

Reviews:

IEI Technology KINO-9652, User Manual, Page: 134 / 269

Search results

Summary of Contents for KINO-9652

Reviews: