IEI Technology KINO-945GSE User Manual Download Page 95

Page: 95 / 190

KINO-945GSE Motherboard

Page 79

power supply unit, the cooling fan of a power supply can also help generate airflow

through the board surface.

NOTE:

IEI has a wide range of backplanes available. Please contact your

KINO-945GSE vendor, reseller or an IEI sales representative at

[email protected]

or visit the IEI website (

http://www.ieiworld.com.tw

)

to find out more about the available chassis.

5.7.2 Motherboard Installation

To install the KINO-945GSE motherboard into the chassis please refer to the reference

material that came with the chassis.

5.8 Internal Peripheral Device Connections

The cables listed in

Table 5-8 are shipped with the KINO-945GSE.

Quantity

Type

Keyboard and Mouse cable

SATA drive cable

1 Power

cable

Dual RS-232 cable

Table 5-8: IEI Provided Cables

Some optional items that can be purchased separately and installed on the KINO-945GSE

include:

Dual port USB cable

44-pin 2.5" IDE cable

RS-232/422/485

cable

DC power cable with terminal block

HDTV out cable

Summary of Contents for KINO-945GSE































































































































































































Search results

Summary of Contents for KINO-945GSE

Reviews:

Related manuals for KINO-945GSE

Brands by name

Popular brands

IEI Technology KINO-945GSE, User Manual

Search results

Summary of Contents for KINO-945GSE

Reviews:

Related manuals for KINO-945GSE

Brands by name

Popular brands