IEI Technology KINO-9152G4 User Manual Download Page 123

Page: 123 / 232

KINO-9152G4 Mini-ITX Motherboard

Page 103

5.7.1 LAN Connection

There are four external RJ-45 LAN connectors. The RJ-45 connectors enable connection

to an external network. To connect a LAN cable with an RJ-45 connector, please follow

the instructions below.

Step 1:

Locate the RJ-45 connectors

. The locations of the USB connectors are shown

Chapter 4

Step 2:

Align the connectors.

Align the RJ-45 connector on the LAN cable with one of

the RJ-45 connectors on the KINO-9152G4. See

Figure 5-23

Figure 5-23: LAN Connection

Step 3:

Insert the LAN cable RJ-45 connector.

Once aligned, gently insert the LAN

cable RJ-45 connector into the onboard RJ-45 connector.

Step 0:

5.7.2 PS/2 Keyboard and Mouse Connection

The KINO-9152G4 has a dual PS/2 connector on the external peripheral interface panel.

The dual PS/2 connector is used to connect to a keyboard and mouse to the system.

Follow the steps below to connect a keyboard and mouse to the KINO-9152G4.

Summary of Contents for KINO-9152G4









































































































































































































































Search results

Summary of Contents for KINO-9152G4

Reviews:

IEI Technology KINO-9152G4, User Manual, Page: 123 / 232

Search results

Summary of Contents for KINO-9152G4

Reviews: