IEI Technology KINO-690S1, User Manual, Page: 93 / 229

KINO-690S1 Mini-ITX Motherboard
Page 75
Step 7: Lock the retention screw. Rotate the retention screw into the locked position.
Step 0:
5.4.2 Cooling Kit CF-479B-RS Installation
Figure 5-2: IEI CF-479B-RS Cooling Kit
An IEI AMD Socket S1 CPU cooling kit ( Figure 5-2 ) can be purchased separately. The
cooling kit comprises a CPU heat sink and a cooling fan.
WARNING:
Do not wipe off (accidentally or otherwise) the pre-sprayed layer of
thermal paste on the bottom of the [Fan model#] heat sink. The thermal
paste between the CPU and the heat sink is important for optimum
heat dissipation.
To install the CF-479B-RS cooling kit, please follow the steps below.
Step 1: Place the cooling kit onto the CPU . Make sure the CPU cooling fan cable
can be properly routed when the cooling kit is installed.
Step 2: Properly align the cooling kit . Make sure its four spring screw fasteners can
pass through the pre-drilled holes on the PCB.
Step 3: Secure the cooling kit . From the solder side of the PCB, align the support
bracket to the screw threads on heat sink that were inserted through the PCB