manualshive.com logo in svg

IEI Technology KINO-690S1, User Manual, Page: 122 / 229

Share
Download
IEI Technology KINO-690S1 User Manual Download Page 122

 

 

KINO-690S1 Mini-ITX Motherboard

Page 104 

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the 

status of the auto detected IDE devices. The following IDE devices are detected and are 

shown in the 

IDE Configuration

 menu: 

 

Primary IDE Master 

 

Primary IDE Slave 

 

Secondary IDE Master 

 

Secondary IDE Slave 

The 

IDE Configuration

 menu (

BIOS Menu 4

) allows changes to the configurations for the 

IDE devices installed in the system. If an IDE device is detected, and one of the above 

listed four BIOS configuration options are selected, the IDE configuration options shown in 

Section 6.3.2.1

 appear. 

6.3.2.1 IDE Master, IDE Slave 

Use the 

IDE Master

 and 

IDE Slave

 configuration menu to view both primary and 

secondary IDE device details and configure the IDE devices connected to the system.   

Summary of Contents for KINO-690S1






































































































































































































































Reviews:

No comments