manualshive.com logo in svg

IEI Technology KINO-690S1, User Manual, Page: 117 / 229

Share
Download
IEI Technology KINO-690S1 User Manual Download Page 117

 

 

KINO-690S1 Mini-ITX Motherboard

Page 99

6.2 Main 

The 

Main

 BIOS menu (

BIOS Menu 1

) appears when the 

BIOS Setup

 program is entered. 

The 

Main

 menu gives an overview of the basic system information.

 

BIOS Menu 1: Main

 

 

System Overview 

The 

System Overview

 lists a brief summary of different system components. The fields in 

System Overview

 cannot be changed. The items shown in the system overview include: 

 

AMI BIOS

: Displays auto-detected BIOS information 

o 

Version

:   

Current BIOS version 

o 

Build Date

:  Date the current BIOS version was made 

o 

ID

:   Installed 

BIOS 

ID 

 

Processor

: Displays auto-detected CPU specifications 

o 

Type

:  Names the currently installed processor 

o 

Speed

: Lists the processor speed 

Summary of Contents for KINO-690S1






































































































































































































































Reviews:

No comments