IEI Technology KINO-690S1, User Manual, Page: 107 / 229

KINO-690S1 Mini-ITX Motherboard
Page 89
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding KINO-690S1 external peripheral interface connector making
sure the pins are properly aligned.
5.8.1 Audio Connection
Audio signals are interfaced through three phone jack connections. The red phone jack is
for Mic In, blue is for Line In and green is for Speaker Out. Follow the steps below to
connect audio devices to the KINO-690S1.
Step 1: Locate the audio phone jacks . The location of the audio phone jacks are
shown in Chapter 3 .
Step 2: Insert audio phone jack plugs . Insert audio phone jack plugs into the audio
phone jacks on the external peripheral interface. See Figure 5-14. Step 0:
Figure 5-14: Audio Connectors
5.8.2 DVI Display Device Connection
The KINO-690S1 has a single female DVI connector on the external peripheral interface
panel. The DVI connector is connected to a digital display device. To connect a digital
display device to the KINO-690S1, please follow the instructions below.
Step 1: Locate the DVI connector . The location of the DVI connector is shown in