IEI Technology IVS-300-ULT3-i5/4G, User Manual

Page: 75 / 110

IVS-300 Embedded System
Page 61
4.3.6 IDE Configuration
Use the IDE Configuration menu ( BIOS Menu 10 ) to change and/or set the configuration
of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc.
Advanced
IDE Configuration
Serial-ATA (SATA)
[Enabled]
SATA Mode [IDE Mode]
SATA Port1 Empty
SATA Port2 Empty
Enable / Disable Serial ATA
---------------------

: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1245. Copyright (C) 2016 American Megatrends, Inc.
BIOS Menu 10: IDE Configuration

Serial-ATA (SATA) [Enabled]
Use the Serial-ATA (SATA) option to configure the SATA controller.

Enabled D
EFAULT
Enables the on-board SATA controller.

Disabled Disables the on-board SATA controller.

SATA Mode [IDE Mode]
Use the SATA Mode option to configure SATA devices as normal IDE or AHCI devices.

IDE Mode D
EFAULT
Configures SATA devices as normal IDE device.

AHCI Mode
Configures SATA devices as AHCI device.