IEI Technology IVS-200-ULT2, User Manual

Page: 39 / 116

IVS-200-ULT2 Embedded System
Page 27
Figure 3-17: Removing the Retention Screw
Step 5: Insert into the socket at an angle
. Line up the notch on the WLAN/WWAN
module with the notch on the slot. Slide the WLAN/WWAN module into the slot
at an angle of about 20º (
Figure 3-18
).
Figure 3-18: Inserting the WLAN/WWAN Module
Step 6: Secure the WLAN/WWAN module
. Secure the WLAN/WWAN module with the
retention screw previously removed (
Figure 3-19
).
Step 7: Connect the RF cable
to the antenna connector on the WLAN/WWAN module
(
Figure 3-19
).