IEI Technology IVS-110, Manual

Page: 67 / 119

IVS-110 Embedded System
Page 53
4.3.5 Power Management
Use the Power Management menu ( BIOS Menu 9 ) to configure the power management
function.
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Advanced
Current Voltage : +12.0 V
Low Voltage Warning [9V]
*** Delay Time Setting ***
Auto Power On Delay [10 sec]
Auto Power Off Delay [20 sec]
Set Low Voltage Warning
(8V~37V)
---------------------

: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 9: Power Management

Low Voltage Warning [9V]
Use the Low Voltage Warning option to set the low voltage warning from 8V to 37V. If the
system voltage is lower than the value set here, the power LED on the system front panel
will blink at regular intervals (refer to Section 1.5.1 ) to warn users.

Auto Power On Delay [10 sec]
Use the Auto Power On Delay option to set the automatic power-on delay time.
Configuration options are listed below.

10 sec D
EFAULT

30 sec

1 min

5 min

10 min

15 min

30 min