IEI Technology ITG-100-AL, User Manual

Page: 78 / 107

ITG-100-AL Embedded System
Page 66

Enabled D
EFAULT
Enables the SCC SD card support.

SCC eMMC Support [Enabled]
Use the SCC eMMC Support option to enable or disable the SCC eMMC support.

Disabled
Disables the SCC eMMC support.

Enabled D
EFAULT
Enables the SCC eMMC support.

eMMC Max Speed [HS400]
Use eMMC Max Speed option to select the eMMC max speed. The following options are
available:

HS400 Default

HS200

DDR50
5.5 Security
Use the Security menu ( BIOS Menu 20 ) to set system and user passwords.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Main Advanced Chipset Security Boot Save & Exit
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be:
Minimum length
3
Maximum length 20
Administrator Password
User Password
Set Setup Administrator
Password
---------------------

: Select Screen
↑ ↓
: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4
Save
ESC Exit
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
BIOS Menu 20: Security