IEI Technology ITDB-100L, User Manual

Page: 77 / 87

ITDB-100L Barcode Reader
Page 68
Step 3:
Tap
barcode
to display the captured images.
The captured images are stored in
/storage/sdcard0/Pictures/barcode
of the
Android device.
Step 4:
Tap an image to check its parameter values.
The parameter values of each captured image are displayed below the image
(
Figure 6-11
).
Figure 6-11: Parameter Values
6.6.2 Sending an Captured Image to IEI
The user might need to report a failed-decoded image to IEI for analyzing. Follow the
steps below to complete the task.
NOTE:
Ensure the captured image to be sent to IEI is stored in Bitmap format.
Refer to
Section 6.3
to set up the captured image format.