iSignager-LCD-S Series Digital Signage Display
Page 22
Figure 2-1: Format the HDD via IDE-USB Cable
Step 2:
Generate a playable disk to the HDD.
Follow the steps described in
Generate
Playable Disk Section
of the iSignager Design user manual to copy the player
settings and the sequence to the HDD. Disconnect the HDD from the computer.
Step 3:
Remove the plastic back cover of the iSignager-LCD-S Series.
The plastic
back cover is secured to the chassis with few retention screws. Remove the
retention screws (
) and lift the back cover off the iSignager-LCD-S
Series.
Figure 2-2: iSignager-LCD-S Series Back Cover Retention Screws
Step 4:
Remove the aluminum back cover
by removing the retention screws.
