iSignager Frame Series
Page 22
Figure 2-8: Arm Mounting Retention Screw Holes
Step 4:
Secure the iSignager Frame Series to the interface pad by inserting four
retention screws through the bottom of the mounting arm interface pad and into
the iSignager Frame Series.
Step 0:
2.2.4 Panel Mounting
To mount the iSignager Frame Series into a panel, please follow the steps below.
Step 1:
Select the position on the panel to mount the iSignager Frame Series.
Step 2:
Cut out a section from the panel that corresponds to the rear panel dimensions
of the iSignager Frame Series. Take care that the panel section that is cut out is
smaller than the overall size of the metal frame that surrounds the iSignager
Frame Series but just large enough for the rear panel of the iSignager Frame
Series to fit through (
and
Figure 2-11
).
