iSignager-800WL-N270 Digital Signage Player
Page 18
Step 4:
Align the wall-mounting bracket screw holes with the pilot holes.
Step 5:
Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (
).
Figure 2-8: Wall-mounting Bracket
Step 6:
Insert the four monitor mounting screws provided in the wall mounting kit into the
four screw holes on the bottom panel of the system and tighten until the screw
shank is secured against the bottom panel.
Step 7:
Align the mounting screws on the iSignager-800WL-N270 bottom panel with the
mounting holes on the bracket.
Step 8:
Carefully insert the screws through the holes and gently pull the monitor
downwards until the iSignager-800WL-N270 rests securely in the slotted holes.
Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.
