iSignager-800WL-N270 Digital Signage Player
Page 14
2.1.3 SD Card Installation
The iSignager-800WL-N270 series has one SD card slot on the front panel. To install the
SD card with display content and player settings generated by iSignager AdMinistrator,
follow the instructions below.
Step 1:
Generate a playable disk to the SD card. Follow the steps described in
Generate
a Playable Disk Section
of the iSignager AdMinistrator user manual to copy the
player settings and the sequence to the SD card. Disconnect the SD card from
the computer.
Step 2:
Open the protection cover from the front panel of the iSignager-800WL-N270.
Unlock the cover first if it is locked.
Step 3:
Locate the SD card slot on the front panel.
Step 4:
Insert the playable SD card into the slot (
).
Figure 2-2: SD Card Location (Front Panel)
Step 5:
Close the plastic cover.
Step 0:
