IEI Technology iSignager-1000-Q354 User Manual Download Page 66

Page: 66 / 189

iSignager-1000-Q354 Digital Signage Player

Page 52

5.3.5.2 Power Configuration

The

Power Configuration

menu (

BIOS Menu 10

) allows the advanced power

management options to be configured.

BIOS Menu 10: Power Configuration

Restore on AC Power Loss [Last State]

Use the

Restore on AC Power Loss

BIOS option to specify what state the system

returns to if there is a sudden loss of power to the system.

Power Off

The system remains turned off

Power On

The system turns on

Last State

EFAULT

The system returns to its previous state. If it was on, it

turns itself on. If it was off, it remains off.

Resume On KeyBoard/Mouse [Disabled]

The

Resume On KeyBoard/Mouse

BIOS option specifies if the system will be roused

from a suspended or standby state when there is activity on the keyboard or mouse.

Summary of Contents for iSignager-1000-Q354






























































































































































































Search results

Summary of Contents for iSignager-1000-Q354

Reviews:

Related manuals for iSignager-1000-Q354

Brands by name

Popular brands

IEI Technology iSignager-1000-Q354, User Manual

Search results

Summary of Contents for iSignager-1000-Q354

Reviews:

Related manuals for iSignager-1000-Q354

Brands by name

Popular brands