IEI Technology iSignager-1000-Q354, User Manual

Page: 37 / 189

iSignager-1000-Q354 Digital Signage Player
Page 23
The clear CMOS jumper settings are shown in
Table 3-5
.
Clear CMOS Description
Short 1 - 2 Keep CMOS Setup Default
Short 2 - 3 Clear CMOS Setup
Table 3-5: Clear CMOS Jumper Settings
The location of the clear CMOS jumper is shown in
Figure 3-4
below.
Figure 3-4: Clear CMOS Jumper
3.3.3 COM 1/2 Pin 9 Setting Jumper
Jumper Label: J_COM1
Jumper Type:
6-pin header
Jumper Settings:
See
Table 3-6
Jumper Location:
See
Figure 3-5
The COM 1/2 Pin 9 Setting jumper configures pin 9 on COM 1 and COM 2 as either a +5 V,
or +12 V power source. The COM 1/2 Pin 9 Setting jumper selection options are shown in
Table 3-6
.