IEI Technology iSignager-1000-Q354, User Manual

Page: 149 / 189

iSignager-1000-Q354 Digital Signage Player
Page 135
8.4.5 DIMM Replacement
To replace the DIMM please follow the steps below.
Step 1:
Remove the cover case. See
Section 8.3.1
.
Step 2:
Locate the DIMM. Push the white clips on the side of the DIMM down. The
DIMM is dislodged from the DIMM socket.
Step 3:
Insert the new DIMM. Properly align the DIMM pins with the socket and the
gently push the DIMM into the DIMM socket until the white side handles close
(
Figure 8-15
).
Step 0:
Figure 8-15: DIMM Installation
8.4.6 ODD Replacement (Optional)
ODD replacement includes the following two procedures:
Step 1:
Removing the malfunction ODD.
Step 2:
Installing the replacement ODD.
Step 0: