IEI Technology iSignager-1000-Q354, User Manual

Page: 143 / 189

iSignager-1000-Q354 Digital Signage Player
Page 129
8.4.3 Motherboard Replacement
POS motherboard replacement includes the following two procedures:
Step 1:
Removing the malfunction motherboard
Step 2:
Installing the replacement motherboard
Step 0:
8.4.3.1 Motherboard Removal
To remove the POS motherboard, please follow the steps below.
Step 1:
Power down the system.
Step 2:
Disconnect all rear panel peripheral device connectors.
Step 3:
Remove the CF module (if installed) from the rear panel of the
iSignager-1000-Q354.
Step 4:
Remove the two VGA connector retention screws, two parallel connector
retention screws and the four serial port retention screws on the rear panel.
(
Figure 8-9
)
Figure 8-9: Rear Panel Connector Retention Screws
Step 5:
Remove the cover case. See
Section 8.3.1
.
Step 6:
Remove the HDD. See
Section 8.4.2.1
Step 7:
Remove the ODD. See
Section 8.4.6.1