IEI Technology IS-453S-8G, User Manual

Page: 27 / 57

IS-453S-8G Industrial NAS
Page 19
Step 2:
Install the hard disk drive (HDD)
Step 3:
Mount the IS-453S-8G
Step 4:
Connect the Ethernet cable
Step 5:
Connect peripheral devices
Step 6:
Power the system up
Step 0:
3.4 Hard Drive Installation
NOTE:
Before installing hard drives, ensure the solid disk drives (SSDs) that
you use are compatible with the NAS.
Four 2.5” SATA hard drives and/or solid disk drive (SSD) can be installed in the
IS-453S-8G. To install the hard drive into the system, please follow the steps below.
Step 1:
Remove all four screws from the front panel (
Figure 3-1
).
Figure 3-1: Front Panel Removal
Step 2:
Remove the hard drive tray (
761
Figure 3-2
).